CNC: Adopting FANUC control system, with automatic grinding wheel dressing and batch workpiece automatic grinding function
- High rigidity casting body
The casting body is calculated by engineering simulation analysis (cosmos), and the column and head are designed with double-layer billet, with high bending and torsion rigidity.
- Stable and precise three-axis guideway
The three axes are equipped with C3 grade ball screws, SP grade high precision linear slides and servo motors, and the feed amount is up to 0.001.
- Automatic Lubrication System
Automatic lubrication device is adopted to provide better lubrication for all transmission screws and sliding surfaces. The lubrication system is equipped with a self-detecting function, and the level switch will issue an alarm when the liquid level in the oil tank drops to the set position.
- High rigidity precision spindle and motor
Each spindle of our company is completely developed and produced by our own factory in Jiande, Taiwan. From the raw material of the outer tube to the assembly (except for imported bearings), it is assembled in the temperature-controlled and dust-free workshop without any outsourcing. Because of such strict production conditions, the spindles are affected by little temperature change, low noise and no vibration, which can provide many years of service without any problems. This machine also adopts flange spindle design, with CP4 grade precision angled ball bearings, V3 grade low vibration motor and dynamic balancing, mounted on the headstock, to ensure that the spindle deflection is far less than 0.002mm.
- Automatic grinding wheel dressing compensation function
The dresser is placed on top of the table, and the servo motor is used for dressing feed, and the feed amount can be programmed or fed by MPG.
- Intelligent operation design
Adopting FANUC control system, the grinding variables can be set through a simple touch screen, which can be used for batch workpiece cycle processing mode, the basic processing modes are general flat grinding, groove grinding, wide groove grinding and high-efficiency grinding.
- Splash-proof box design
The machine is equipped with a full-covered splash-proof box, which can effectively shield the grinding water and iron chips from splashing to the rear of the machine, not only to maintain the cleanliness of the machine, but also to prevent the grinding liquid from being sprayed into the slide rail of the machine, which ensures the machine's life and precision.
PRODUCT SPECIFICATIONS
){kind=link}
){kind=link}