CSD-3060ah/Ahr/Ahd High Precision Manual Molding Surface Grinder Machine

• After-sales Service: Technical Assistance
• Warranty: 1 Year
• Type: Surface Grinding Machine
• Processing Object: Planar Mill
• Abrasives: Grinding Wheel
• Controlling Mode: Artificial
• Model NO.: 3060AH/AHR/AHD
• Automatic Grade: Manual
• Precision: High Precision
• Condition: New
• Table Dimensions: 600X300
• Table Speed: 5-25 M/Min
• Occupied Area: 3500X2500 mm
• Gross Weight: 1950 mm
• Transport Package: Customizable
• Specification: Customizable
• Trademark: TRANSTAR
• Origin: China

Product Description

Product Description

AH: Front/back, left/right and up/down axes are automatically operated, and up/down feed can be manually controlled according to the work requirements, which is convenient for operation.
AHD: Front, back, left, right and up/down axes are automatically operated, up/down feed can be preset with feed volume and feed times, and the machine stops automatically when the work is finished.
Highly rigid casting body
The main body, table, slide, column and head and other important castings are all made of high-grade cast iron, and through finite element analysis and calculation, to achieve the rigidity and quality of the engineering needs of the multiplier, each casting has been eliminated by the internal stress treatment, to ensure that no deformation for a long time, and has excellent bending and torsion stress, to ensure that the machine tool for a long time of the precision of the research and cutting.
Fully-supported table hard-rail structure
The table adopts fully-supported hard-rail structure with Turcite-B and manual scraping to ensure that the damping coefficient of the table is reduced under load to ensure the smooth operation of the table and the grinding accuracy.
Independent Hydraulic System
Single-cylinder drive, with independent hydraulic system design, the table has 5-25m/min adjustable speed and low vibration characteristics, suitable for a variety of purposes of processing, the use of high-quality oil seals made in Japan to ensure smooth sliding and service life.
High Precision Spindle
Each spindle of our company is completely developed and produced by our own factory in Jiande, Taiwan. From the raw material of the outer tube to the assembly (except for the imported bearings), it is assembled in the temperature-controlled and dust-free workshop without any outsourcing, and it is precisely because of such strict production conditions that the spindles are affected by the small temperature change, low noise and no vibration, which can provide many years of service without any problems. This machine also adopts the elastic spindle design, with CP4 grade precision angled ball bearings, V3 grade low vibration motors and dynamic balancing, mounted on the headstock, to ensure that the spindle deflection is far less than 0.002mm.
Automatic Lubrication System 
Adopting circulating center lubrication device, on the one hand, all transmission screws and sliding surfaces are better lubricated, on the other hand, the waste oil is recovered and filtered for recirculation lubrication, which is not only environmentally friendly, but also saves unnecessary expenditure on lubrication oil. The lubrication system is equipped with a self-checking function, and the level switch will issue an alarm when the level of oil in the tank is reduced to the set position.
Electrical control system 
Professionally designed electrical control system complies with CE safety requirements and adopts electrical components of international famous brands, which provides reliable operation, low noise and low vibration, and reliably ensures the needs of high-precision grinding.
Graphic Operator Panel
The operation panel box is of fixed design, the control is completely concentrated on the operation panel, which is ergonomic; the operation panel is of graphical design, the function is clear at a glance, and the operation is easy to learn.
Splash-proof wall panel (optional accessory)
Splash-proof wall plate can be installed at the rear of the machine, which can effectively block the splashing of grinding water and iron chips to the rear of the machine, not only to maintain the cleanliness of the machine, but also to avoid the spraying of abrasive into the slide rail of the machine, to ensure the longevity and precision of the machine.
PRODUCT SPECIFICATION

Mountings	Specifications		Unit	CSD-3060AH/ AHR/ AHD
Ability	Table Dimensions		mm	600×300
	Maximum forward and backward movement		mm	660
	Maximum left-right movement		mm	330
	Distance between spindle center and work surface		mm	540
	Maximum bearing weight of working table		kgs	420
Work Table	Table T-slots		mm×N	14×1
	Table speed		m/min	5-25
	Front and rear handwheel feed	a check	mm	0.02
		a round	mm	4
	Auto-supplying from front to back		mm	0.1-8
	High speed moving from frong toback	50HZ	m/min	790
		60HZ	m/min	950
Grinding Wheel	Grinding Wheel Size		mm	Φ355×20-40×127
	Speed of mainshaft	50HZ	R.P.M	1450
		60HZ	R.P.M	1740
Upper and lower mechanism	Up& down handwheel feed	a check	mm	0.01	0.001
		a turing round	mm	2	0.5
	Auto-supplying volumn		mm	/	0.005-0.025
	High-speed mouing dimension from up to down		mm/min	/	130
Motor	Spindle motor		H×P	5×4
	Drive motor up and down		H×P	/	80W
	Drive motor up and down		H×P	3/4×2
	Vacuum motor		H×P	1/8×2
	Back and front driving motor		H×P	40
Machine Size	Mechanical height		mm	1830
	Occupied area		mm	3500×2500
	Net weight		kgs	1750
	Gross Weight		kgs	1950

Products Details